How to fix a BenQ Projector that does not turn on?
If your BenQ Projector doesn't turn on, make sure the power cord is securely plugged into both the projector's AC power jack and a working power outlet (and the outlet switch is on, if applicable). Also, if you've recently turned it off, wait for the cooling process to complete before attempting to turn it on again.
Why is my BenQ MH5005 Projector remote control not working?
If the remote control for your BenQ Projector isn't working, first replace both batteries with new ones. Then, ensure there are no obstructions between the remote and the projector. Finally, make sure you are within 8 meters (26 feet) of the projector.
What to do if my BenQ MH5005 Projector has no picture?
If your BenQ Projector displays no picture, ensure the video source is on and properly connected. Also, verify the projector is correctly connected to the input signal device and the correct input signal is selected using the SOURCE key. Finally, make sure the lens cover is open.
How to resolve a blurred image on a BenQ MH5005?
If your BenQ Projector image is blurred, adjust the focus using the focus ring on the projection lens. Also, adjust the projector's angle, direction, and height to properly align it with the screen. Ensure that the lens cover is open.
To Next Page
General
