Do you have a question about the BenQ MH750 and is the answer not in the manual?
Number of colors | 1.073 billion colors |
---|---|
Native aspect ratio | 16:9 |
Projection distance | 3.8 - 4.9 m |
Vertical scan range | 24 - 120 Hz |
Horizontal scan range | 15 - 102 kHz |
Projection technology | DLP |
Contrast ratio (typical) | 10000:1 |
Screen size compatibility | 30 - 300 \ |
Projector native resolution | 1080p (1920x1080) |
Vertical synchronization (max) | 120 kHz |
Vertical synchronization (min) | 24 kHz |
Keystone correction, horizontal | -30 - 30 ° |
Horizontal synchronization (max) | 102 kHz |
Horizontal synchronization (min) | 15 kHz |
Noise level | 36 dB |
Noise level (economic mode) | 39 dB |
Offset | 115 % |
Throw ratio | 1.15 - 1.5 |
Focal length range | 16.87 - 21.87 mm |
Aperture range (F-F) | 2.59 - 2.91 |
Lamp power | 310 W |
Lamps quantity | 1 lamp(s) |
Light source type | Lamp |
Service life of light source | 2500 h |
Service life of light source (economic mode) | 3500 h |
Full HD | Yes |
Supported video modes | 720p, 1080p |
Analog signal format system | NTSC, PAL, SECAM |
Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
Number of bulbs | 1 bulb(s) |
MHL version | 2.0 |
Composite video in | 1 |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component video (YPbPr/YCbCr) in | - |
Wi-Fi | No |
RMS rated power | 10 W |
Placement | Desktop |
Product type | Standard throw projector |
Product color | White |
LED indicators | Power, Temperature |
Market positioning | Business |
Power source | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 0.5 W |
Power consumption (typical) | 390 W |
Storage temperature (T-T) | -20 - 60 °C |
Storage relative humidity (H-H) | 10 - 90 % |
Cables included | AC, VGA |
Remote control type | IR |
Depth | 216.3 mm |
---|---|
Width | 314.2 mm |
Height | 102 mm |
Weight | 3300 g |
Essential guidelines for safe operation and handling of the projector.
Covers lamp heat, operation hazards, electrical safety, and physical placement risks.
Addresses ventilation, environmental conditions, and proper surface placement.
Covers projector orientation, physical impact, liquid spills, and ceiling mounting precautions.
Explains physical buttons, rings, and indicator lights on the projector.
Identifies and explains the primary buttons on the remote control.
Illustrates how to connect various audio and video sources to the projector.
Step-by-step instructions for powering on the projector and initial setup.
Covers projection angle, auto-adjustment, and fine-tuning image size/clarity.
2D Keystone correction and Corner Fit correction.
Password security setup and recall/management.
Step-by-step instructions for properly powering off the projector.
Explains the messages and indicators that signal the need to replace the projector lamp.
Safety guidelines and warnings before and during lamp replacement.
Step-by-step instructions for physically removing and installing a new projector lamp.
Details on correctly connecting the lamp and installing the cover.
Addresses common problems like no power, no picture, blurred image, remote issues, and password errors.