What to do if my BenQ Projector has no picture?
If your BenQ Projector isn't displaying a picture, ensure the video source is powered on and the signal cable is properly connected. Also, verify that the projector is correctly connected to the input signal device. Finally, use the SOURCE key on the projector or remote to select the correct input signal.
Why won't my BenQ MH856UST turn on?
If your BenQ projector doesn't turn on, first, make sure the power cord is securely plugged into both the projector's AC inlet and a working power outlet, ensuring the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again.
How to fix BenQ Projector remote control that does not work?
If the remote control for your BenQ projector isn't working, first replace the battery with a new one. Then, make sure there are no obstructions between the remote and the projector. Finally, ensure you are within 7 meters (23 feet) of the projector.
How to fix blurred image on BenQ MH856UST?
If the image from your BenQ projector is blurred, adjust the focus of the lens using the focus ring. Also, adjust the projection angle, direction, and height of the unit to properly align the projector and the screen.
General| Display Technology | DLP |
|---|---|
| Brightness | 3500 ANSI Lumens |
| Zoom Ratio | 1.2x |
| Lamp Life (Normal) | 3500 hours |
| Lamp Life (Economic) | 7000 hours |
| Speakers | 10W x 2 |
| 3D Ready | Yes |
| Native Resolution | 1920 x 1080 |
| Contrast Ratio | 10, 000:1 |
| Keystone Correction | Vertical: ±30° |
| Connectivity | HDMI, VGA, USB, RS-232 |
| Wireless Connectivity | Optional |
| Noise Level | 33 dBA (Normal), 28 dBA (Economic) |
Essential safety guidelines for operating the projector, including reading the manual and avoiding eye damage.
Instructions on lamp handling, electrical safety, placement, and environmental precautions.
Warnings against improper handling, and safety for wall mounting.
Overview of key features, shipping contents, and the projector's external layout.
Details on projector control panel buttons, remote functions, and laser pointer use.
Guide to positioning, quick install, keystone correction, and corner fit adjustments.
Technical dimensions, lens shift, and connecting video/audio sources.
Procedures for starting up, adjusting image quality, and using the OSD menu.
Setting passwords, locking controls, selecting aspect ratio, and optimizing picture modes.
Using presentation timer, hiding image, remote paging, and high altitude mode.
Guidelines for cleaning, storing, transporting, and replacing the projector lamp.
Explains indicator lights, warning messages, and solutions for common issues.
Detailed specs, resolution, timing charts, and environmental requirements.
Details the warranty terms, copyright, and legal disclaimers for the product.
To Next Page
