62
LED Indicator Switches the power key’s LED indicator on or off. • ON
• OFF
Display This feature is provided to allow aspect ratios other than 16:9
to be displayed without geometric distortion.
If you choose to display images on certain screen size, you
can adjust the height of the images by the navigation keys on
the remote control. The resolution does not change with the
screen size.
Full Scales the input image to fill the screen. Ideal
for 21:9 aspect images.
Aspect The input image is displayed without geometric
distortion filling as much of the display as
possible.
1:1 Displays the input image in its native resolution
without scaling.
22"W Displays the input image as if on a 22"
wide-screen monitor.
24"W Displays the input image as if on a 24"
wide-screen monitor.
27"W Displays the input image as if on a 27"
wide-screen monitor.
32"W Displays the input image as if on a 32"
wide-screen monitor.
Overscan Slightly enlarges the input image. Use this
feature to hide annoying edge noise if present
around your image.
Available only when the input is a video timing from
HDMI.
• ON
• OFF
KVM Switches the keyboard and mouse control over different
inputs.
Auto Switches the keyboard and mouse control over
an available input.
Upstream Switches the keyboard and mouse control over
the input source / display connected to USB
upstream port.
USB-C Switches the keyboard and mouse control over
the input source / display connected to USB-C™
port.
USB-C Awake If this function is disabled, the USB-C™ port/USB hub is not
supplied with power while the monitor is in standby mode.
To keep supplying power to the USB-C™ port/USB hub in
monitor’s standby mode, change the setting to ON.
• ON
• OFF
Item Function Range
To Next Page
Loading...
Need help?
General
