What to do if my BenQ Digital projector does not turn on?
If your BenQ Digital projector doesn't turn on, ensure the power cord is properly plugged into both the projector's AC inlet and a functioning power outlet. If the outlet has a switch, make sure it's on. Also, if the projector is cooling down, wait until the process is complete before attempting to turn it on again.
General| Native aspect ratio | 4:3 |
|---|---|
| Projection distance | - m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 102 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 15000:1 |
| Screen size compatibility | 60 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.023 kHz |
| Horizontal synchronization (max) | 102 kHz |
| Horizontal synchronization (min) | 15 kHz |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Offset | 106 % |
| Throw ratio | 1.94 - 2.32 |
| Focal length range | 21.8 - 25.6 mm |
| Aperture range (F-F) | 2.46 - 2.66 |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Cable lock slot type | Kensington |
| Full HD | No |
| Supported 3D formats | Frame Sequential, Frame packing, Side by side, Top and bottom |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
| Lamp type | UHP |
| Lamp power | 203 W |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 10000 h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 260 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 252 W |
| Power consumption (PowerSave) | 211 W |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Noise level | 32 dB |
| Noise level (economic mode) | 29 dB |
| On Screen Display (OSD) languages | ARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HIN, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, THA, TUR |
| Remote control type | IR |
Weight and Dimensions| Depth | 241.3 mm |
|---|---|
| Width | 332.4 mm |
| Height | 99 mm |
| Weight | 2380 g |
To Next Page
