How to fix BenQ MU686 that does not turn on?
If your BenQ Projector isn't turning on, consider these potential causes: * There might be no power from the power cord. Plug the power cord into the AC power jack on the projector and into the power outlet. If the outlet has a switch, ensure it's switched on. * You might be attempting to turn the projector on again during the cooling process. Wait until the cooling down process has completed.
How to fix a BenQ MU686 Projector that does not turn on?
If your BenQ Projector doesn't turn on, there might be a simple explanation. First, ensure the power cord is securely plugged into both the projector's AC power jack and a working power outlet, and that the outlet switch is on, if applicable. Also, if you've recently turned the projector off, wait until the cooling down process has completed before attempting to turn it on again.
What to do if my BenQ MU686 has no picture?
If your BenQ Projector is displaying no picture, there are several potential causes: * The video source might not be turned on or connected correctly. Ensure the video source is on and the signal cable is properly connected. * The projector might not be correctly connected to the input signal device. Check the connection. * The input signal might not be correctly selected. Select the correct input signal using the SOURCE key on the projector or remote control. * The lens cover might still be closed. Open the lens cover.
Why is my BenQ Projector image blurred and how to fix it?
A blurred image on your BenQ Projector could be due to several reasons: * The projection lens might not be correctly focused. Adjust the focus of the lens using the focus ring. * The projector and the screen might not be aligned properly. Adjust the projection angle and direction as well as the height of the projector if necessary. * The lens cover might still be closed. Open the lens cover.
What to do if BenQ MU686 remote control does not work?
If the remote control for your BenQ Projector isn't working, check the following: * The battery might be out of power. Replace the battery with new ones. * There might be an obstacle between the remote control and the projector. Remove the obstacle. * You might be too far away from the projector. Stand within 8 meters (26 feet) of the projector.
How to fix blurred image on BenQ MU686?
If your BenQ Projector image is blurred, try these solutions: Adjust the focus of the lens using the focus ring. Also, make sure that the projector and the screen are aligned properly by adjusting the projection angle, direction, and height of the projector. Finally, ensure that the lens cover is open.
Why is my BenQ Projector remote control not working?
If the remote control for your BenQ Projector isn't working, first, replace the battery with new ones. If that doesn't work, make sure there is no obstacle between the remote control and the projector. Finally, ensure that you are within 8 meters (26 feet) of the projector.
To Next Page
General
