BenQ MX560 - Settings

7
Settings
1. Determine the COM Port name used for the RS232 communications in Device
Manager.
2. Choose Serial and the corresponding COM port as the communication port. In this
given example, COM6 is selected.
3. Finish Serial port setup.
Baud rate
9600 / 14400 / 19200 / 38400 / 57600 / 115200 bps
Check the baud rate of the connected projector from its OSD
menu.
Data length
8 bit
Parity check
None
Stop bit
1 bit
Flow control
None