BenQ MX723 - Adjusting corner fit

Operation
30
Adjusting corner fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
• Using the OSD menu
1. Select Corner Fit in the DISPLAY menu and
press Mode/Enter.
2. Press / / / to select one of the four
corners and press Mode/Enter.
3. Press / to adjust vertical values from 0 to 60.
4. Press / to adjust horizontal values from 0 to
60.
• Using the QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press to select Corner Fit and press
Mode/Enter.
3. Follow the steps 2~4 in the above section.