BenQ MX723 - Specifications

Specifications 75
Specifications
All specifications are subject to change without notice.
Optical
Resolution
(MX723)
1024 x 768 XGA
(MW724)
1280 x 800 WXGA
Display system
1-CHIP DMD
Lens F/Number
(MX723)
F= 2.5~3.12
f= 16mm~25.46mm
(MW724)
F= 2.41~2.78
f= 15.76mm~21.11mm
Offset
(MX723)130%
(MW724)125%
Zoom ratio
(MX723)1.6X
(MW724)1.36X
Lamp
(MX723)260W
(MW724)240W
Electrical
Power supply
AC100–240V, 3.4 A,
50-60 Hz (Automatic)
Power consumption
(MX723) 335W (Max.); < 0.5 W; < 6 W
(when the Network function in the
Standby Settings is on)
(MW724) 315W (Max.); < 0.5 W; < 6 W
(when the Network function in the
Standby Settings is on)
Mechanical
Weight
(MX723) 2.9 kg
(MW724) 3.0 kg
Output terminals
RGB output
D-Sub 15-pin (female) x 1
Speaker
(Stereo) 10 watt x 1
Audio signal output
PC audio jack x 1
Control
IR receiver x 1 (front)
RS-232 serial control
9 pin x 1
LAN control
Wired (RJ45)
USB
Mini B
Supports firmware upgrade
Type A
1.5A output
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital-HDMI x 1
Audio signal input
Audio in
PC audio jack x 1 for audio input
PC audio jack x 1 for microphone
audio input
RCA audio jack (L/R) x 2
Environmental Requirements
Operating temperature
0°C-40°C at sea level
Operating relative humidity
10%-90% (without condensation)
Operating altitude
0-1499 m at 0°C-35°C
1500-3000 m at 0°C-30°C (with High
Altitude Mode on)
Lamp life results will vary depending on environmental conditions and usage.