Operation
36
static images are generally brighter than "Video" using mostly moving
images (movies).
• The input signal type effects the options available for the Picture Mode.
See "Selecting a picture mode" on page 38 for details.
• The native display resolution of MX723 is in a 4:3 aspect ratio while the
native display resolution of MW724 is in a 16:10 aspect ratio. For best
display picture results, you should select and use an input signal which
outputs at this resolution. Any other resolutions will be scaled by the
projector depending upon the 'aspect ratio' setting, which may cause
some image distortion or loss of picture clarity. See "Selecting the
aspect ratio" on page 37 for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the
projector's HDMI input and the projected picture displays wrong colors, please
change the color space to YUV.
1. Press Menu/Exit and then press / until the SOURCE menu is selected.
2. Press to select Color Space Conversion and press / to select a
suitable color space.
This function is only available when the HDMI input port is in use.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the OSD menu
1. Press Menu/Exit and then press / until the DISPLAY menu is selected.
2. Press
to select Digital Zoom and press Mode/Enter. The Zoom bar
displays.
3. Press on the projector repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press Mode/Enter to switch to the paning mode and
press the directional arrows ( , , , ) to navigate the picture.
5. To reduce size of the picture, press Mode/Enter to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size.
You can also press repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can
further magnify the picture while searching for details.