Operation
60
FUNCTION DESCRIPTION
Operation
Settings
Direct Power On
Selecting On enables the function. See "Starting up the
projector" on page 27 for details.
Signal Power On
Selecting On the projector will turn on automatically when VGA
signal is detected.
Selecting Off the projector has to be turnned
on manually (by keypad or remote).
See "Starting up the
projector" on page 27
for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off"
on page 67 for details.
Quick Cooling
Selecting On enables the function and the projector cooling time
will be shortened to a few seconds.
If you attempt to restart the projector right after
the quick cooling process, it may not be turned on
successfully and will rerun its cooling fans.
Instant Restart
When instant restart is on, users can restart projector
immediately within 90 secs after turning off projector.
Blank Timer
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See "Hiding the
image" on page 44 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
4. SYSTEM SETUP: Basic menu
To Next Page
Loading...
