EN-12
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation as shown. (label side front)
4. Insert an SD/SDHC memory card (Optional).
The camera has
32MB internal me
mory
(23MB available for image storage),
but you can
load an SD/SDHC memory card to expand the camera’s memory capacity.
Be sure to format the memory card with this camera before its initial usage.
5. Close the battery/memory card cover and make sure it is locked securely.
To prevent valuable data from being accidentally erased from an SD/
SDHC memory card, you can slide the write protect tab (on the side
of the SD/SDHC memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card.
To prevent damaging of an SD/SDHC memory card, be sure to turn off the power when inserting
or removing the SD/SDHC memory card. If inserting or removing the SD/SDHC memory card with
the power on, the camera will automatically turn off.
Charging the Battery
The battery is not fully charged at the time of purchase. Fully
charge the battery and discharge it for at least one complete
cycle before use to maximize its performance and lifetime.
1. Connect camera to USB-AC adapter with USB cable.
2. Insert the plug into a wall outlet.
The included USB-AC adapter differs depending on the region where you purchased the camera.
User can also charge the battery by connecting camera to computer with USB cable.
Charging time varies according to the ambient temperature and the status of battery.
Status LED Description
Green (blinks slowly) Charging normally
Off Charging finished
Green (blinks quickly) Error
1
2
To Next Page
Loading...
Need help?
General
