EN-21
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
1. Press the MODE button, and set the camera mode to [ ].
2. Press the button, and select [ ] icon with the e / f buttons. Press the SET
button.
With Face Detection turned on, the camera identifies main face (white frame)
and subsidiary faces (gray frames).
If the camera cannot detect and track any faces, there will be no frame shown on
the screen.
3. Press the shutter button halfway down to lock the
focus.
When the main face is in focus, the white frame
simultaneously turns green. Otherwise, it turns
red.
4. Press the shutter button down fully to capture your
image.
Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
Self-portrait Function
Use this function to take pictures of yourself or include yourself in pictures.
1. Press the MODE button, and set the camera mode to [ ].
2. Press the e button, and select [ ] icon with the e / f buttons. Press the SET
button.
3. Press the shutter button down fully to activate this function.
4. The camera identifies main face (white frame) and subsidiary faces (gray frames)
automatically. When the main face is in focus, the white frame simultaneously turns
green.
If the camera cannot detect and track any faces, there will be no frame shown on
the screen. If it does not detect any face within 30 seconds, the camera will
automatically capture an image and return to preview display.
5. After twice blinking of the self-timer LED, one image will be captured.
The camera will return to self-portrait preview to detect face.
Press the shutter button halfway down to exit.
Main Face(Green Frame)
Focus Lock
To Next Page
Loading...
Need help?
General
