Correcting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
•
Using the OSD menu
1.
Press MENU/EXIT and then press ◄/►
until the Display menu is highlighted.
2.
Press ▼ to highlight Corner Fit and press
MODE/ENTER. The Corner Fit page
displays.
3.
Press ▲, ▼, ◄, ► to select one of the four
corners and press MODE/ENTER.
4.
Press ▲/▼ to adjust vertical values from 0 to
60.
5.
Press ◄/► to adjust horizontal values from 0
to 60.
To Next Page
