BenQ T420 - Connecting the Digital Input

Setting up the display20
Connecting the digital input
1. Connect the VIDEO IN (DVI-D) jack on the display to the DVI-D output jack on a
computer using a DVI-D cable. If the computer has an HDMI output jack, connect
the computer’s HDMI output jack to the VIDEO IN (HDMI) input jack on the display
using an HDMI cable or a DVI-D to HDMI conversion cable.
2. Connect the computer’s audio output jack to the AUDIO IN (AUDIO1) jack on the
display using a suitable audio cable.
3. To view video image from this input, press the DVI or HDMI button on the remote
control.
The cables are not supplied and should be purchased separately.
Audio cable
Computer
DVI-D cable
DVI-D to
HDMI
conversion
cable
HDMI
cable
TL550 / T650
T420