To Next PageTo Next PageWhat to do if my BenQ W7000+ doesn't turn on?
First, ensure the power cable is securely plugged into both the AC inlet on the projector's rear and a functioning power outlet, and that the outlet switch is on. If it still doesn't power on, it might be cooling down, so wait until the process is complete. Finally, check that the lamp cover is correctly and securely attached.
What to do if BenQ W7000+ remote control does not work?
If your BenQ Projector's remote control isn't working, first replace both batteries with new ones. If that doesn't solve the problem, check for any obstacles between the remote and the projector and remove them. Also, ensure you're within 8 meters (26.2 feet) of the projector.
Why is there no picture on my BenQ W7000+ Projector?
If your BenQ Projector displays no picture, start by ensuring your video source is both turned on and correctly connected. Also, verify that the projector is properly connected to the input source device. Finally, make sure you've selected the correct input source using the Source keys on the remote or the SOURCE button on the projector.
How to fix a blurred picture on my BenQ Projector?
If the picture on your BenQ Projector is blurred, try these steps: First, adjust the focus of the lens using the focus ring. If the issue persists, adjust the projection angle, direction, and height of the projector to properly align it with the screen.
Why is the image unstable on my BenQ Projector?
If the image from your BenQ Projector is unstable, the connection cables are not securely connected to the projector or the signal source. Ensure that the cables are correctly connected to the appropriate terminals.
What to do if 3D content does not display correctly on BenQ W7000+ Projector?
If 3D content isn't displaying correctly on your BenQ Projector, try these steps: 1. Recharge the 3D glasses. 2. Verify the settings in the 3D menu are correct. 3. Ensure you are using a 3D Blu-ray Disc. 4. Select HDMI 1 or HDMI 2 as the input source, using the Source keys on the remote or the SOURCE button on the projector.
General| Display Technology | DLP |
|---|---|
| Native Resolution | 1920 x 1080 |
| Brightness | 2000 ANSI Lumens |
| Contrast Ratio | 50, 000:1 |
| 3D Support | Yes |
| Projection Size | 40" - 300" |
| Zoom Ratio | 1.5:1 |
| Inputs | HDMI, VGA, Composite |
| Lamp Life | 4000 hours (normal), 5000 hours (eco) |
