Bentlon 65880 - Armrests; Height Adjustment; Home Function

User Manual www.dancohr.com page 9
2.6 Armrests
As a rule the armrests remain parallel to the seat. When the chair is in completely horizontal position, the
armrests to front are on the same level as the seat. It allows you to use the full width of the chair. With
the chair is at its full length it’s also possible to pivot the armrests backwards below the level of the
backrest. This is recommendable for back massage. For a client lying facedown it means he can rest his
arms in a natural position. The little hole at the extreme point of the armrests offers you the possibility to
fit the optionally available manicure bowl (fig. 2.7). To allow easy access for your client, the armrests can
be pivoted backwards.
Figure 2.7
2.7 Height Adjustment
The working of the height of the chair can be adjusted electrically with the two switches on the left of the
foot control (fig. 2.2). Keep the switches pushed down until the desired position is obtained (fig. 2.8).
Figure 2.8
2.8 Home function
The chair can be adjusted with a single button on the foot pedal to
the home position (Figure 2.2). In this position, one can easily get up
from the chair and sit in the chair.