2. OPERATING THE PRODUCT
2.1
Operating the chair
On the rear of the chair right is the the socket for the electric foot control. The plug is fitted correctly
when it is inserted like shown in fig. 2.1. Make sure the pins are well orientated. The plug needs to be
pressed as far as possible into the socket, which may need some effort.
On the left side of the socket for the electric foot control the mains socket is situated. First plug the
power cord into the socket and next connect it to a grounded power strip or AC outlet.
Figure 2.1 Inserting plug
2.2
Adjustments
The working of the chair can be adjusted electrically with the switches of the foot control (see figure 2.2).
Keep the switches pushed down until the desired position is obtained.
Figure 2.2 Adjustments
Attention:
Before connecting the power cord to the mains, check if the mains voltage indicated on the
CE label (on the rear the chair) corresponds with the mains voltage in your country or area.
To Next Page
Loading...