User Manual www.dancohr.com page 4
1. GENERAL INFORMATION
Your product, together with the accessories, is packed in a box that is suitable for normal despatch.
However, transport damage may occur. To make sure the product wasn’t damaged during transport, we
recommend that you check the product as follows:
(1) Unpack the product and the accessories carefully.
(2) Check the product and the box for scratches, dents, tears, etc.
(3) Check all buttons, connections and switches for possible damage.
(4) Check the accessories for damage.
If the product or accessories have been damaged during transport, you should notify your supplier of this
in writing within 15 days of receipt of the product. Transport damage that is not notified or is
notified too late is not included under the guarantee.
1.1
Features Bentlon Podo Gold Rotate
The Bentlon Podo Gold Rotate is a top model amongst the Dancohr pedicure chairs. A foot switch
electrically operates the height, the inclination of the seat and the backrest independently from each
other. Both leg rests can be adjusted independently in 3 directions. The seat of the chair can be rotated
left or right by 0 - 90º and the back rest can be levelled horizontal. Details about the adjustable parts are
described read the chapter ‘Operating the Product’.
1.2
Before using the chair
• After removing the staples that connect the middle section of the box with the bottom, this
middle section can easily be taken off.
• The chair now stands free on the case bottom. Now check if there did not occur any damage to
the chair during transport. In case of damage immediately call the dealer.
• Now two persons can lift the chair and carry it carefully to its place you had in mind.
In the plastic bag accompanying the chair you find the necessary tools to mount the chair on the floor
and to mount the leg rest on the chair.
Figure 1.1 Tools
The adjustable feet are can be found at the corners of the chair. (See illustration 1.2). They can be
screwed right to make them shorter and left to make them longer. An uneven flooring or otherwise
instability of the chair stands can be corrected with these adjustable feet. Adjust the chair to its highest
possible position and tilt it sideward to have easy access to the feet.