BeoCord VX 7000 - Setting Your Preferences

> Starting out…
10
Setting your preferences
When you have called the Setup menu
up on the screen, the option against the
first item is lit up in red, and you are
ready to set your preferences for the
video tape recorder:
SPR... On or Off
E-240 tape... Yes or No
Display mode... Track, Time used or
Time left
Speed... SP or LP
Track marker... On or 0ff
See the next page for further infor-
mation about each item in the Setup
menu.
The
tt button moves the red text from
item to item in the menu. When an item
lights up in red, it can be changed by
pressing ▲ or ▼.
When you have set your preferences,
press GO to accept and store them in
the video tape recorder. Then press
EXIT to remove the menus from the
screen.
Note: Depending on the function you wish to use,
you may have to change your preferences in the
video tape recorder’s Setup menu from time to
time.
Switch on the video tape recorder
Call up the main menu
Press to light up Setup in red
Press to call up the Setup menu
The Setup menu appears, and the
option against the first item is lit up
in red:
Press to move the red text to the
other items in the menu
Press to reveal other options
Set the various items to your liking,
then...
...press to store them in the video
tape recorder
Setup V.Tape
SPR On
E-240 tape Yes
Display mode Track
Speed SP
Track marker On
V TAPE
MENU
then
GO
then
tt
or
GO
The Setup menu allows you to set up your own
special preferences for the video tape recorder.
To make use of all the functions
described in this guide, you must set
your special preferences for the
BeoCord VX 7000. These preferences
must be entered into the video tape
recorder’s Setup menu.
You can call up the Setup menu by
selecting the last item, Setup, in the
main menu.