BeoCord VX 7000 - STARTING OUT; Initial Setup Steps

STARTING OUT…
6
Before you start
Before you can start using your
BeoCord VX 7000 as described in this
guide, you must:
• First set it up in accordance with the
instructions in the Setting-up guide,
which is also enclosed with the video
tape recorder.
• Then you must make sure that the TV
stations from your BeoVision TV are
stored in the video tape recorder as
well:
In most cases, this happens quite automatically,
but you may find it necessary to fine tune the TV
programs in the VX 7000 (see page 8).
In a few instances, however, you may have to
tune the video tape recorder in manually (see the
Setting-up guide and pages 30-31 for further
information).
• Then you must check that the clock
in the BeoCord VX 7000 is set to the
correct time (see page 9).
• Finally, it is important that you set up
your own preferences for some of the
functions in the video tape recorder
(see pages 10-11).
But, as the very first thing, it may be a
good idea to get familiar with the on-
screen menus...