BeoCord VX 7000 - Using the On-Screen Menus

7
Using the on-screen menus
Each item in the main menu represents another
menu/function which you can call up on the
screen:
•Timer recording... Calls up the menus you must
use to program a timer recording (see page 18).
•Tape list... Calls up the tape list (see page 22).
•Tape naming... Calls up the menus in which you
can list and name your recordings (see page 23).
•Tracking... Calls up the tracking adjustment
function (see page 24).
•Set clock... Calls up the menu for setting the
BeoCord VX 7000 clock (see page 9).
•Auxiliary select... Choose this item to cut in the
signal from any auxiliary video equipment
connected to the BeoCord VX 7000 AUXILIARY
INPUT sockets (see page 27 and the Setting-up
guide).
•Fine tuning... Calls up the small fine tuning
menu (see page 8).
•Setup... Calls up the Setup menu for the
BeoCord VX 7000 (see page 10).
Operation of the somewhat more
advanced functions in the BeoCord VX
7000 is guided by on-screen menus.
The MENU button on the Beo4 remote
control calls the main menu for the
video tape recorder up on the screen.
Each item in the main menu gives
access to a special menu for that
particular function.
When you call up the main menu, the
first item is lit up in red. The red text is
moved to the next item in the menu by
pressing
▼ on the Beo4 remote control.
When the item you want is lit up in red,
you can call up the menu for that
particular function by pressing GO on
the Beo4.
Note: Some of the menus you will be calling up
are menus in which you must fill in information:
In such fill-in menus, the red text is moved from
item to item by pressing
tt or ss on the Beo4
remote control. When an item turns red,
information can be keyed-in using the number
buttons; or you can browse through the options
available for that particular item by pressing the
step buttons
▲ or ▼ until you find the one you
want.
Switch on the video tape recorder
Call up the main menu
Press to move the red text to the
other items in the menu
Make sure that the item/function
you want is lit up in red, then...
Press to call up the menu for that
particular function
Press to remove the menus from the
screen
In fill-in menus:
Press to move the red text from item
to item
Press to key in numbers
Press to reveal other options
When you have filled in the required
information,...
...press to accept
Menu V.Tape
• Timer recording
• Tape list
• Tape naming
• Tracking
• Set clock
• Auxiliary select
• Fine tuning
• Setup
V TAPE
MENU
then
GO
EXIT
or
tt
ss
0
9
through
or
GO