BeoCord VX 7000 - Page 13

13
By means of the starshaped buttons you
can:
• Play the tape in slow motion;
• Cue the tape forward or backwards;
• Fast forward and rewind the tape to
the position you want.
Unless otherwise instructed, the video
tape recorder plays the tape through to
the end. The tape is then rewound to
the beginning, and the BeoCord VX
7000 stops automatically.
To switch off the BeoCord VX 7000,
press the stand-by button •.
Note: If the video tape recorder is left unused
for more than 8 minutes, it switches off
automatically.
Note: The track search functions (on page 12)
require that the tape was recorded with the
Track marker function cut in (see pages 10-11 for
further information).
Note: Please refer to pages 10-11 for further
information about the Track, Time left and Time
used counter position indications.
Press while the tape is playing to...
...cue forward through the tape
Press again to accelerate the speed
...cue backwards through the tape
Press again to accelerate the speed
Plays the tape in slow motion
Plays the tape backwards in slow
motion
Fast forwards the tape
Rewinds the tape
Press again to accelerate the speed
Press to pause the tape with a still
picture on the screen
Press again to stop playback of the
tape
Press to switch to stand-by
or
tt
ss
STOP
STOP
•
or
or