BeoCord VX 7000 - Page 2

2
This guide explains how to operate your BeoCord
VX 7000 video tape recorder using the Beo4
remote control.
Before you can start using the BeoCord VX 7000
as described in this guide, you must set it up in
accordance with the instructions in the small
Setting-up guide which is also enclosed with the
video tape recorder. Beware of the section Using
other TVs in the Setting-up guide, and of pages
30-31 in this guide. Then please refer to page 6,
Before you start, in this guide.
Note: Maintenance instructions and instructions
for using other video equipment with the video
tape recorder are also found in the Setting-up
guide.