> Recording on video tape: Timer recording
20
Note: The display TIMER on the front of the
BeoCord VX 7000 lights up whenever one or more
timer programmings are waiting to be executed.
Note: If there is no tape in the BeoCord VX 7000
when you program your recording, you will be
reminded to load one by the information Load
Tape, which appears on the screen.
Or, if there is a record protected tape in the VX
7000, it will be ejected automatically, and you will
be reminded to load another.
Note: Don’t forget that the clock in the BeoCord
VX 7000 must be set to the right time so that your
timer recordings can be executed correctly at the
programmed time. See how on page 9.
ANOTHER WAY OF PROGRAMMING:
Some BeoVision TVs enable you to program a
timer recording directly from the teletext page
listing TV programs. This means that you don’t
have to call up the video tape recorder’s menu to
program the video tape recorder. See the User’s
guide for your TV for further details.
Note: Programming via teletext is not available in
all Bang & Olufsen TVs.
To Next Page