Special operating modes
When the hand box is switched off, press "Man." and "On" at the same time to go to the
special operating modes. When the box is switched on, please hold "Man." for at least
5 seconds.
The display shows
Use "3" to scroll through the selection. "1" brings you back to the selection. To leave
the manual mode,
press "OK" at every signal head.
Select
in the hand box. The selected signal head flashes yellow. Please repeat the input at the
other signal head. To stop the flashing mode, switch back to Automatic as described
above.
Select
in the hand box. The selected signal head switches to dark (lamps off e.g. at night). All
of the signal head lamps go off or stay dark. Please repeat the input at the other signal
head. To stop the dark mode, switch back toAutomatic as described above.
Flashing mode
Lamps off / dark:
7
Manual
Op.
Auto
>ok<
Flashing
>ok<
Dark
>ok<
To Next Page
Loading...