Berner BHPC 150-2 - Telescopic Handle; Water Connection; Mounting of Spray Lance

13Original Instructions
5.2 Mounting of spray lance 1. Pull the blue quick-release
grip (A) of the spray gun
backwards.
2. Insert the nipple of the spray
lance (B) into the quick-re-
lease connection and release
it.
3. Pull the spray lance (or other
accessory) forwards to check
that it is securely attached to
the spray gun.
5.3 Water connection $QRUGLQDU\JDUGHQKRVHRI
min. 10 m and max. 25 m will
be suitable.
NOTE: Connec-
tion to the public
mains according
to regulations.
IMPORTANT! Only use wa-
ter without any impurities. If
WKHUHLVDULVNRIVLOWVDQGRU
sediment in the inlet water (i.e.
IURP\RXURZQZHOODQDGGL-
WLRQDO¿OWHUVKRXOGEHPRXQWHG
1. Let the water run through
the water hose before con-
necting it to the machine to
prevent sand and dirt from
penetrating the machine.
Note: Check that
WKH¿OWHULV¿WWHG
in the water inlet
pipe and that it is clean and
free from debris.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
ZDWHUPD[SUHVVXUHEDU
PD[WHPSHUDWXUH&
3. Turn on the water.
5.4 Telescopic handle
The machine features a tele-
scopic handle. To raise or lower
WKHKDQGOHSUHVVWKHEXWWRQ
(15) and move the handle up-
wards or downwards. When a
FOLFNLVKHDUGWKHKDQGOHLVLQ
right position.
NOTE!
Always remove any dirt from
the nipple before connecting
the spray lance to the spray
handle.
A
B