Bernina 1008 - Threading the Machine; Upper Threading Steps

www.picnet.org
How to Thread the Machine
Threading the upper thread
Place the reel of thread on one of the
two thread holder pins.
Firmly clip the thread into the thread
guide (1) on the top of the machine.
Bring the thread down through the
channel at the front of the machine,
and then loop it into the (2) Guide
Hook as you pull it upwards to the (3)
Take Up Leaver. Once hooked into the
take up leaver, pull the thread down
towards the presser foot and then
hook the thread into the (4) Needle Holder Thread Guide before threading the needle.
Thread and Load the Bobbin
1
2.
3
4.
4.
Thread guide