Bernina 1090 - Page 39

What to adjust
Normal condition
Adjust the stitch width and stitch length with the
knobs
Select another stitch
To check the electrical transport equalization,
sew using stitch 28
Press all function buttons and check LEDs
Press all stitch selection buttons.
Appropriate LED display (SB/SL manvol
adjustment) must light up.
Both LED displays do not light up
‘Sewn patterns must be closed
All LED's should light up
‘The respective LED should light up.
Basic values of stitch width and stitch length
аге displayed (LED)
Function-test electronic