Bernina 2500DCET - 3-Thread Cover Stitch Threading

46
Threading 3-thread cover stitch
46
1
1
2
2
3
3
4
4
7
6
8
8
88
5
Cover stitch looper
(purple markings)
Place the spool on the spool pin as illustrated.
As described on page 42.
Cover stitch needle R
(brown markings)
Cover stitch needle L
(yellow markings)
Place the spool on the spool pin as illustrated.
As described on page 43 and 45.
1
2
3
4
5
6
7
8
9
10
11
2
After threading
Test sew: Place a piece of fabric under the
presser foot and needles, begin sewing.
When sewing is complete, raise the needles
by turning the handwheel away from you
(clockwise). This releases the needle threads
from the lower looper. Do not use the needle
stop button! Raise the presser foot and
remove work towards the left. Cut threads
(thread cutter).
2500_DCE_2_englisch_neu 09.10.2007 15:00 Uhr Seite 46