Bernina 2500DCET - Page 47

47
Threading 3-thread narrow cover stitch
1
2
3
4
5
6
7
8
9
10
2
1
1
2
2
2
33
5
4
6
7
8
8
Cover stitch looper
(purple markings)
Place the spool on the spool pin as illustrated.
1. Bring the thread up from the spool and
lay it from the back to the front into the
guide.
2. Thread the first guide on the machine.
3. Take the thread through the groove.
4, 5, 6, 7, thread guides as illustrated
(purple markings).
8. Press the lever of the auto-threader
down.
9. Thread the slit of the threader. Push the
auto-threader lever up and it will return
to its normal position.
10. Thread the looper eye. Leave the thread
end (8 cm or 3“) hanging in the machine.
Cover stitch needle C
(green)
Cover stitch needle L
or R
(yellow/brown)
Place the spool on the spool pin as illustrated.
As described on pages 43, 44 and 45.
46
2500_DCE_2_englisch_neu 09.10.2007 15:00 Uhr Seite 47