EasyManua.ls Logo

Bernina 330 - Height Compensation of Uneven Layers; Sewing Corners

Bernina 330
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Preparation - Sewing
Feed Dog
Button flush with housing = sewing position.
Button depressed = feed-dog is lowered.
for free-motion sewing (darning, embroidery, quilting, etc.)
Pulling, pushing or holding back the fabric will result in uneven stitches.
Let the fabric feed evenly.
With each stitch the feed dog moves forward by one step. The length of this
step is determined by the stitch length selected.
With an extremely short stitch length, the steps are also very short. The fabric
moves under the foot quite slowly, even at full sewing speed. e.g. buttonholes,
satin stitch and decorative stitches are all sewn with a very short stitch length.
Feed-Dog Drop
Feed-dog and fabric feed
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN

Other manuals for Bernina 330

Related product manuals