Bernina 570 QE User Manual (English)

Other manuals for Bernina 570 QE

User Manual208 pages

User Manual214 pages

Workbook70 pages

Questions and Answers:

H
hensleydebraAug 22, 2025
Why does my Bernina 570 QE Sewing Machine keep breaking the upper thread?
- H
  Holly BennettAug 22, 2025
  If the upper thread breaks frequently, several factors could be at play. First, ensure that your needle and thread are a compatible match. If the upper thread is too tight, reduce the tension. Rethread the machine to rule out threading errors. Use only quality thread to prevent breakage. If the stitch plate or hook tip is damaged, contact a specialized BERNINA dealer for repairs. Also, check the thread take-up lever area for any caught thread; remove the headframe, clear any remnants, and reattach it.
G
Gloria HolmesSep 1, 2025
Why aren't the sewing light and free arm light working on my Bernina 570 QE?
- L
  lfloresSep 1, 2025
  If neither the sewing light nor the light on the free arm lights up on your Bernina sewing machine: * Check the settings in the Setup Program; activate it in the Setup Program. * If the sewing light is defective, contact the specialized BERNINA dealer.
J
Jean DoyleAug 31, 2025
What to do if my Bernina 570 QE Sewing Machine is skipping stitches?
- J
  Jason HughesAug 31, 2025
  If your Bernina sewing machine is skipping stitches, consider these possible causes: * The needle may be incorrect; use the needle system 130/705H. * The needle might be blunt or bent; replace the needle. * You might be using a poor-quality needle; use a new BERNINA quality needle. * The needle may be incorrectly inserted; insert the needle with the flat side to the back as far up as it will go into the needle holder and tighten the screw. * The needle point may be incorrect; match the needle point to the texture of the material.
H
hartmanuelAug 30, 2025
How to fix uneven stitches on my Bernina 570 QE?
- D
  Donna MorganAug 30, 2025
  Uneven stitch formation can occur for several reasons. Check the upper thread tension and adjust if it's too tight or loose. Replace the needle, ensuring you're using a new, high-quality BERNINA needle. Also, verify you're using quality thread and that the needle and thread are correctly matched. Ensure the machine is correctly threaded. Avoid pulling the fabric; instead, feed it evenly. Finally, confirm that you are using the bobbin case marked with the triangle.
A
Amber LivingstonAug 28, 2025
How to fix error during software update on Bernina 570 QE?
- S
  Stephen SmithAug 28, 2025
  If you encounter an error during a software update on your Bernina sewing machine: * If the USB stick is not recognized, use a BERNINA USB stick. * If the update process is blocked and the hourglass on the display is inactive, remove the USB stick. * If the date of the software update cannot be found, switch the machine off.
D
Dr. Jack HowellAug 27, 2025
Why does the upper thread keep breaking on my Bernina 570 QE?
- E
  Edward OchoaAug 27, 2025
  If the upper thread keeps breaking on your Bernina sewing machine, consider the following: * The needle and thread combination might be incorrect; match the needle with the thread size. * The upper thread may be too tight; reduce the upper thread tension. * The machine might be incorrectly threaded; rethread it. * The thread quality could be poor; use quality thread. * The stitch plate or hook tip may be damaged; contact a specialized BERNINA dealer for repairs. * The thread may be caught in the area of the thread take-up lever; replace the stitch plate.
J
jonessarahAug 27, 2025
How to resolve an error during a software update on my Bernina Sewing Machine?
- A
  Angel WoodAug 27, 2025
  If you encounter an error during a software update, first ensure you are using a BERNINA USB stick. If the update process is blocked with an inactive hourglass, remove the USB stick, switch the machine off and on, and then follow the display instructions. If the software update data cannot be found, unzip the update data and save it directly onto the USB stick, not within a folder.
C
Calvin CruzAug 25, 2025
What to do if my Bernina 570 QE Sewing Machine doesn't start?
- J
  John RichardsonAug 26, 2025
  If the machine doesn't start, first ensure the room temperature is favorable by placing the machine in a warm room one hour before use, and make sure it's connected and switched on. If it still doesn't start, contact a specialized BERNINA dealer as the machine may be damaged.
B
Brittany SmithAug 23, 2025
What to do if my Bernina 570 QE skips stitches?
- T
  tdayAug 23, 2025
  Skipped stitches can occur if you're using the wrong needle, so ensure you're using the 130/705H needle system. Replace the needle if it is blunt or bent, and make sure it is a BERNINA quality needle. Check that the needle is correctly inserted with the flat side to the back, pushed as far as it can go into the needle holder, and that the screw is tightened. Finally, match the needle point to the material's texture.

Bernina 570 QE Specifications

General

Stitch Width	9 mm
Maximum Sewing Speed	1000 stitches per minute
Sewing Space to the Right of the Needle	8.5 inches
Color Touch Screen	Yes
Automatic Thread Cutter	Yes
Adjustable Presser Foot Pressure	Yes
Start/Stop Button	Yes
Needle Positions	11
Bernina Free Hand System (FHS)	Yes
Stitch Length	6 mm
LCD Screen	Yes
Memory Function	Yes
USB Port	Yes