Bernina Artista 180 User Manual

Version information
• version screen appears
• shows the version of software
loaded into the artista sewing
machine
• shows the version of software
loaded into the embroidery module
(special accessory), if applicable
• the embroidery module must be
connected to the machine to show
the version on the screen
Screen Calibration
Personal [5] 1
Program |5| j
j Functions |Q~|
Stitch length
Stitch width
Needle position ?
| Beeper 1 Motor speed
Thread- 11 *
tension U - j
Start screen
Return to
basic setting
Sewing light
Service
■
esc
Calibrating the screen is important
for making on-screen selections by
touch. If the screen is not calibrated,
you may touch one selection and the
machine will read one next to it. For
precision touch selection, the screen
must may be calibrated.
Setup menu
• press the external Setup button,
menu appears
• touch Service
Version Screen
Adjustment
of hoop
esc
Service Screen
• service screen appears
• select screen
• select this screen if the on-screen
buttons do not react properly when
selected (touched)
Calibration
• screen calibration screen appears
• press each black point in the center,
one after the other
• it is not important which point is
selected first
• the machine will beep when the
dots are touched to let you know
contact was made
• will automatically go back to the
previous screen
• touch esc to return to the setup
screen
• touch esc to return to last selected
stitch screen
Setup Program 65
• the version of software in the
sewing machine and in the embroi
dery module must be the same for
optimum results
• touch esc to return to the previous
screen
Note: The screen is calibrated at the
factory, but shipping and transport
ing may affect it.
The screen only needs to De cali
brated if there is a problem with
precision touching.
Important Note:
When calibrating the screen, take
care to touch the b l a c k d o t s o n l y .
If the screen is miscalibrated by
touching any area other than the
black dots, it may require a technical
adjustment by an authorized
technician.

Bernina Artista 180 Specifications

General

Embroidery Module	Optional
Display	LCD
Maximum Sewing Speed	900 stitches per minute
USB Connectivity	No
Stitch Length	5 mm
Needle Up/Down	Yes
Speed Control	Yes
Automatic Needle Threader	Yes
LCD Screen	Yes
Built-in Memory	Yes
USB Port	No