Servicemanual_aurora_435_450_english_V3_032530.50.04_Korrektur.doc 50
SP 10.3 BSR information - frame number
SP 10.4 BSR Information - production date
What to test: SP 10.3 Display of BSR frame number
What to adjust:
Attach BSR foot
Press key 10 three times in the basic
program.
Press key 18 to confirm selected test.
Press OK key to exit and return to basic
program.
Desired status:
Each test type is displayed in the matrix
(symbol g) until activated by pressing key
18 (start/stop).
The frame number is displayed in the
matrix.
symbol g
Repair note:
• none
What to test: SP 10.4 Display of production date
What to adjust:
Attach BSR foot
Press key 10 four times in the basic
program.
Press key 18 to confirm selected test.
Press OK key to exit and return to basic
program.
Desired status:
Each test type is displayed in the matrix
(symbol g) until activated by pressing key
18 (start/stop).
The date of production is displayed in the
matrix.
symbol g
Repair note:
• none
To Next Page
