Bernina Q 16 User Manual

Setting up the machine
26
> Select «Programmable functions»(1) on the sewing screen.
1
2
1 «Programmable functions» 2 «Kick-start»
> Select the required function for the back kick.
1 2 3 4
1 «No function» 3 «Raising/lowering the needle»
2 «Single stitch/securing» 4 «Presser foot position»
> Close the window.
– The function will be programmed. With each back kick on the foot control, the selected function will
be carried out.
Using the single stitch/securing function
With «Single stitch/securing», you can trigger the following functions:
• Pull the bobbin thread upward with a single stitch.
• Sew a programmed number of securing stitches.
Prerequisite:
• The back kick is programmed with «Single stitch/securing». (see page25)
> To pull the bobbin thread up with a single stitch, briefly tap the foot control with your heel.
> To sew the programmed number of securing stitches, press the foot control down longer with your heel.

Bernina Q 16 Specifications

General

Type	Longarm Quilting Machine
Throat Space	16 inches
Lighting	LED
Presser Foot Lift	Automatic
Bobbin Type	M Class
Built-in Stitches	None (Quilting Focused)
Warranty	Limited warranty