8
INSTALLINGTHELEGS
Bertazzonirangesmustbeusedonlywiththe
legsproperlyinstalled.
Fourheight‐adjustablelegsareshippedwiththe
rangeinthepolysterenecontainersituatedover
theappliance.
Before installing the legs, position the appliance
nearitsfinal location as thelegsare not suitable
formovingtheapplianceoverlong
distances.
After unpacking the range, raise it enough to
insert the legs in the appropriate receptacles
situated on the lower part of the appliance.
Lowertherange gently tokeepany unduestrain
fromlegsandmountinghardware.Ifpossibleuse
apalletorliftjackinsteadoftiltingthe
unit.
Adjust leg height to the desired level by twisting
the inside portion of the leg assembly until the
properheightis reached. Checkwith a levelthat
thecooktopisperfectlylevel.
INSTALLINGTHEWORKTOP
FRONTGUARD
Toincreasetheclearancebetweenthefrontedge
of the worktop and the burners it is possible to
install the worktop frontguard shipped with the
appliance.
Toinstallthefrontguard,hold itwiththepointed
edges looking up. Align the edges of the
frontguard with the appropriate receptacles in
the
bottom of the worktopandpressfirmlyuntil
the frontguard is securely attached to the
worktop.
ATTENTION: once installed the frontguard may
only be removed by disassembling the worktop.
Attempting to remove the frontguard without
disassembling the worktop will result in
permanentdamagetotheworktop.
To Next Page
Loading...
