2.3
List of tools to be provided by the user
9
Pliers
Fastener ring-
Lower hinge
Hinge
grommet
Leveling the doors
Pliers
Diagram of adjusting the door.
Precautions before operation
1. Before the operation, it shall be ensured that the refrigerator is disconnected from power source.
Before adjusting the door, precautions shall be taken to prevent any personal injury.
2. Raise the lower door up to the level of the higher door.
3. Insert the supplied fastener ring using pliers in the gap between the hinge-grommet and the lower hinge.
The number of fasten-rings you will need to insert depends on the gap. See figure above.