ECO mode
Press the ECO MODE key to enter the Eco mode, and the backlight will illuminate; the SUPER FREEZE mode is
automatically canceled. The freezer temperature is adjusted to -14°C/7°F and the refrigerator temperature to
7°C/44°F. Press the ECO MODE key again to exit the Eco mode: the backlight will turn off; the freezer and
refrigerator temperature will return to the temperature set before entering the ECO mode. The function will take
effect after locking.
Code Name
EH The humidity sensor fails
F5 Ice maker fails to release ice
F4 The sensor of the ice maker fails
CC Ice maker defrost sensor failure
C9 The sensor in ice making chamber fails
CA The communication between main control board and ice making board fails
F6 The initialization of the ice maker fails
E0 The initialization of freezing ice maker fails
E1 Refrigerator temperature sensor failure
E2 Freezer temperature sensor failure
E3 Quattro Temp Zone sensor failure
E4 Refrigerator frost sensor failure
E5 Freezer frost sensor failure
E6 The communication between display board and main control board fails
E7 The ambient temperature fails
19
Error codes
When there is an error, the digital temperature display zone will display an error code in locked mode. When multiple errors are
detected, those error codes are displayed cyclically, and an alarm chime will sound. Press any key to turn off the alarm chime
(whether in locked or unlocked mode). After fixing the issue, the error code will disappear on the digital display zone.
Anti-condensation heater strip
The anti-condensation heater strip could be turned on and off via combined button, by pressing
“ ECO MODE+FREEZER-TEMP” for 3 seconds, the Fahrenheit symbol will blink, it will take effect
by pressing the locking key, and the anti-condensation heater strip will be turned off;
“
ECO MODE+FREEZER-TEMP
To Next Page
Loading...
