Bestech Electronics BT-6901 - Special Function; Screen Character Operation

9
Deleting preset press button “clear”+”number”+”enter”.
Remark:
Some preset points are used tentatively for special functions.
3.3 Special Function
The follow presets are predefined as special function, please shot+ preset No+ enter to enable
those functions
：
Remark
: If use some other equipments to control speed dome, some special functions
probably can’t be effective because of the limite of protocol.
3.4 Screen Character Operation
Call preset 95 to
enter the OSD, call preset 94 to exit the OSD.

Up or Down : Move the option of the OSD, change the value on the OSD.

Right
：
Enter the option, select the item or confirm.

Left
：
Return to main menu or cancel

Angle Display: XXX.XX(pan)/XXX.XX(tilt)

COMM. Display: Display the dome ID and baud rate on the top left corner of the
screen.
Remark:
1. Items with“< >” mean they have sub menu.
2. “
→
”means the cursor selecting some option.
3. “
※
” means editing the content of some option selected.
4. When entering the setting page in menu, it is useless to call preset 94 to exit the
menu directly. Such as the submenu <SET> in menu <GUARD TOUR SET>.
PREST
FUNCTION
PRESET
FUNCTION
33
Pan scan180
º
88
Freeze on
34
Reset
89
Freeze off
79
Digital zoom on
92
A
-
B scan
80
Digital zoom off
94
OSD off
81
Auto day/night
95
OSD on
82
Switch to night
96
Guard tour 3
83
Switch to day
97
Guar
d tour 2
86
BLC on
98
Guard tour 1
87
BLC off
99
Pan scan