Bestech Electronics BT-6901 - Pan Scan; Park Action

15
After deleted, the preset points display as 0. While the exact preset point information doesn’t be
deleted. So it is convenient for user to select the preset point needing to be scanned. Speed
and dwell time will reset as default setting.
4.3.4 Pan Scan
Fig. 4.3.4.1 Fig. 4.3.4.2
PAN SCAN SPEED
Pan scan speed is 1 to 64 grade selectable.
INIT
Reset the scan speed and tilt degree as default setting.
RUNNING
Running the scan speed and tilt degree set.
4.3.5 Park Action
Fig. 4.3.5.1 Fig. 4.3.5.2
PARK MODE
Park mode includes OFF, Park action, A-B scan, Pan scan, guard tour01, guard tour02, guard
tour03 and Preserve action.
When park mode is OFF status, the dome doesn’t run park mode.
<PAN SCAN>
PAN SCAN SPEED 20
INIT
RUNNING
EXIT
PAN SCAN
RUNNING…
LEFT KEY TO EXIT
PAN
：
XXX TILT
：
XX
<PARK ACTION>
PARK MODE OFF
PARK TIME 01M
<SETTING>
RUNNING
DELETE
EXIT
<PARK ACTION>
PRESET 1: SAVE
PRESET 2: BACK