16
When park mode is PRESERVE ACTION status, it record previous action order(A-B scan, Pan
scan, Guard tour 01, Guard tour 02, Guard tour 03).
Example: Running A-B scan at first, when the action stops unexpectedly, it enters the park
mode to continue to run A-B scan.
PARK TIME
Park time is 01~60 mins selectable.
SETTING
After entering the OSD menu, as 7.4.8.2, move to the desired position and save the settings.
RUNNING
Running the park action, if there is no setting, system will remind of it . Please set park action.
DELETE
Delete the settings.
4.3.6 Privacy Zone
Fig. 4.3.6.1 Fig. 4.3.6.2 Fig. 4.3.6.3
MASK NO.
Mask No. depends on the number of the module supported. The selective range of Sony is
from 1 to 24.
MASK
Mask has on and off selectable.
SETTING
Set the specific parameter of present mask NO. and call preset 1 to save the settings.
Direction operation—Modify the coordinate of dome
Zoom operation—Modify the size of scenery
Iris operation—Modify the size of privacy zone
Remark
: The mask size is better more than double the target size. If needing to modify mask
<PRIVACY ZONE>
MASK NO. 01
MASK OFF
<SETTING>
EXIT
<PRIVACY ZONE>
PRESET 1: SAVE
<PRIVACY ZONE>
PRIVACY PROPOSED TO
OPEN
To Next Page
Loading...