Installation Instructions
Bronco® Skyrider
P1 - 52462 Rev. E 0922
Installation Instructions - Bronco® Skyrider
© 2022 Bestop, Inc.
Vehicle Application:
Ford Bronco 4 Door 2021-Current
Part Number 52462
Installation TimeTools
Skill Level
Support
We’re here to help! Go to:
https://www.bestop.com
and click on Need Help?
https://www.bestop.com/video-library
3 - Moderately Difficult
Before you begin installing your new Sunrider for Hardtop,
please read all the instructions thoroughly, and watch the Bestop
Installation video. (See Support section on this page).
Do not rely in any way on the components of this product to protect
against injury or death in the event of an accident. Never operate the vehicle in excess of
manufacturer’s specifications.
Read and follow, precisely, all installation instructions provided when installing this product.
Failure to do so may result in a poor fit and could place occupants of the vehicle in a potentially
dangerous situation.
WEAR SEAT BELTS AT ALL TIMES
Safety glasses should be worn at all
times when installing this product.
WARNING
Installation Tips
CAUTION
For easier installation, the top should vbe installed at a temprature above 72° F.
Below this temprature, the fabric may contract making it difficult to fit the vehicle.w
Safety
Glasses
T30, T40
and T50
Torx Drivers
NotesNotes
*We suggest using two people to help lift the top onto
the vehicle.
2.5 Hours
To Next Page
Need help?
General
