Bestop Windjammer - Advanced Installation; Securing the Retainer Strip; Optional Duster Compatibility

80062 3
Rev. A 1298
Step Three
The plastic strip sewn along the sides of the Windjam-
mer is notched to fit around the stop in the retainer.
Working the notch around the stop, slip the plastic into
the retainer on the vehicle.
Plastic Strip
Rear
Retainer
Slip Plastic Strip into
Retainer
Work Notch in Plastic Strip
around stop in Retainer
Windjammer
Duster
Adjust Hook and Loop
for a smooth fit with
Duster
Step Four - Optional
If a you are using a Duster with the Windjam-
mer, adjust the hook and loop along the
bottom of the Windjammer and the top of the
Duster for a smooth fit.
Fabric
Detail of Plastic
Strip
Cross Section View
Retainer
Plastic Strip