Automatic Uniform Sidedrive Carton Sealer (AS)
13
Installation/Setup
INSTALLATION CHECKLIST
Power: 1PH 110vac 50/60Hz
Voltage uctuation range: 95% - 105%
Temperature: 40 degrees to 105 degrees Fahrenheit
Relative humidity: 30% to 80% RH
Noise Level: 70 DECIBELS
MACHINE PACKING
The machine is secured on a pallet, wrapped with bubble wrap, covered with double wall corrugated
box, then secured onto the pallet with two plastic straps.
UNCRATING PROCEDURES
1. Position the crate in a large, uncluttered area to unpack the machine.
2. Lift and remove the corrugated box.
3. Remove the bubble wrap.
4. Remove the shipping anchors on the four legs.
5. Lift the machine from the pallet using properly rated cord.
6. If the casters are attached, the machine can be moved manually and rolled to the proper
location.
To Next Page
Loading...