Automatic Uniform Sidedrive Carton Sealer (AS)
16
Installation/Setup
AIR INSTALLATION
1. Make sure air supply is dry. Flush all liquids out of your air lines before installation. If water
from your air lines enters machine, this will deteriorate pneumatics and will void all warranty.
2. Polycarbonate bowls may be damaged and possibly fail if exposed to synthetic oils or thinner
solvents. If used above atmosphere use metal bowl.
3. If water builds up in polycarbonate bowl, release the valve to drain.
4. Main regulator valve should always be in upright position.
5. Attach the main air supply source to coupler plug in main air regulator.
To Next Page
Loading...