Automatic Uniform Sidedrive Carton Sealer (AS)
7
Safety
ELECTRICAL SAFETY
1. Allow only qualied electricians or electronic technicians to work on electrical components or
controls.
2. Always assume that an electrical circuit is “live” until proven otherwise by proper testing
conducted by an authorized person.
3. Repair or replace frayed, cut, broken, or damaged electrical wires, cables, and connectors.
4. Check that electrical ground wires, motor plugs, and power cable connections are properly and
securely connected before starting any equipment.
5. Know all locations of main electrical shut-o boxes in case of an emergency.
To Next Page
Loading...