Beta 1760/RMS - Page 34

34
EN
HOLD button
The HOLD function allows the meter to “freeze” a measurement for later reference.
Press the HOLD button to “freeze” the reading on the indicator. The “HOLD” message will be
appear in the display.
Press the HOLD button again to return to normal operation.
BACKLIGHT button
Press the BACKLIGHT button to switch on the display light.
Press BACKLIGHT button again to exit the light mode.
MAX/MIN button
The MAX/MIN function allows the meter to capture the highest or lowest measurement for later
reference.
Press the MAX/MIN button to begin measurement. The indicator “MAX” or “MIN” will appear
in the display.
If the “MAX MIN” messages are ashing, the instrument is in MAX/MIN mode but not recor-
ding, press the MAX/MIN button to select a mode.
To return to normal AUTO measurement mode, hold down the MAX/MIN button for 2 seconds.
1
2
1
2
1
2
3