Beta 1760/RMS - DC;Ac.voltage.measurement

36
EN
RANGE button
When the meter is rst turned on, it automatically goes into AutoRanging. This automatically
selects the best range for the measurements being made and is generally the best mode for most
measurements. For measurement situations requiring that a range be manually selected, perform
the following:
Press the
RANGE button. The “Auto” display indicator will turn off, The “Manu” display
indicator will turn on
Press the
RANGE button to step through the available ranges until you select the range you
want.
Press and hold the
RANGE button for 2 seconds to exit the ManualRanging mode and return
to
AutoRanging.
DC/AC VOLTAGE MEASUREMENT
Sert the black test lead into the negative COM terminal and the red test lead into the positive
V terminal.
Set the function switch to the VAC or VDC position.
Use the MODE button to select AC or DC Voltage
Connect the test leads in parallel to the circuit under test.
Read the voltage measurement on the LCD display
1
2
3
1
2
3
4
5