Need help?Do you have a question about the Beta EVO 80 and is the answer not in the manual?
General| Fuel System | Carburetor |
|---|---|
| Front Brake | Disc |
| Rear Brake | Disc |
| Dry Weight | 66 kg |
| Engine Type | 2-stroke single cylinder |
| Cooling System | Liquid cooled |
| Transmission | 6 speed |
| Starter | Kick start |
| Front Suspension | Telescopic fork |
| Rear Suspension | Monoshock |
| Wheelbase | 1280 mm |
Identifies motorcycle components and handlebar controls for operation and identification.
Locates identification numbers and lists key specifications like dimensions and capacities.
Illustrates the motorcycle's electrical system with component legends and wire colors.
Outlines essential pre-ride inspections, cleaning, and fuel-filling procedures.
Covers recommended fluids, the initial run-in period, and engine starting procedures.
Procedures for checking and replacing gearbox oil, brake fluid, fork oil, and coolant.
Maintenance tasks for air filter, spark plug, and reed valve petals.
Inspection of brake pads for wear and replacement procedures.
Post-cleaning checks, and the overall maintenance schedule for all service intervals.
Adjusting front/rear brake lever/pedal play and clutch lever position.
Procedures for setting engine idle speed and adjusting throttle cable free play.
Adjusting steering head play, front fork preload/damping, and rear shock settings.
Procedure for checking and adjusting the drive chain tension for optimal performance.
A guide to identifying and resolving common engine and brake-related issues with suggested solutions.
To Next Page
